Welcome to 21st Marine!

Your Shopping cart is empty.

Skip to Main Content »

SD4-2 Master display log remote control bridge wing Speed log display for CONSILIUM SAL T2E 704042 Acoustic Correlation Dual Speed Log

SD4-2 Master display log remote control bridge wing Speed log display for CONSILIUM SAL T2E 704042 Acoustic Correlation Dual Speed Log

Be the first to review this product

Availability: In stock

$999.00
OR

Quick Overview

SD4-2 Master display log remote control bridge wing Speed log display for CONSILIUM SAL T2E 704042 Acoustic Correlation Dual Speed Log

SD4-2 Master display log remote control bridge wing Speed log display for CONSILIUM SAL T2E 704042 Acoustic Correlation Dual Speed Log

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The SAL SD4 is a versatile instrument used primarily as a display to indicate speed, distance and depth. It can also be used to remotely control such equipment, which is not easily accessible or has no user interface, for example a speed log or an interface cabinet.

The SD4 display is intended as a successor to the SD1 and SD2 displays. The different display versions of the SD4 series are utilised using the same main display body with different front panel foils.

 Mounting The four attaching holes in the display are threaded with an M6 thread making it possible to mount the display either with four M6 screws from the back or with four M5 screws from the front using nuts on the backside. When the display is mounted on a flat surface using M5 screws with nylon washers from the front and the provided neoprene gasket is used, a protection of IP66 is achieved

Technical data
Powering
Input voltage
Current
10 - 32 VDC (12 or 24 VDC nominal)
450 mA maximum, maximum light
level & "lamp test" 250 mA typical
Environmental conditions
As required by IEC 60945 4th edition.
If mounted in watertight cabinet according to "exposed"category,
otherwise "protected".
Watertight as required by IEC 529 category IP66 if mounted in SD4
BMB box or panel mounted on a flat surface.
Dimensions
144 x 144 x 16 mm, mounts in standard panel cutout
Inputs and outputs
Serial
Remote inputs
+5VDC output
Connections
Isolated IEC61162-1 (NMEA)
standard input.
Standard IEC61162-1 (NMEA)
output, based on RS485 driver
3 inputs with internal pull-up to
+5V, activated by grounding to OV.
One output with 35mA current capacity.
Connections of power inputs and output are done via a 10-pole
plug-in terminal, maximum cable area 1.5 mm2

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

[profiler]
Memory usage: real: 39845888, emalloc: 39533512
Code ProfilerTimeCntEmallocRealMem