Welcome to 21st Marine!

Your Shopping cart is empty.

Skip to Main Content »

JOHNSON CONTROL TYCO mzx Minerva MX SEAPLUS WATER MIST SYSTEM FIRE ALARM SYSTEM t2000 PSB800 POWER SUPPLY MODULE - 557.202.405

JOHNSON CONTROL TYCO mzx Minerva MX SEAPLUS WATER MIST SYSTEM FIRE ALARM SYSTEM t2000 PSB800 POWER SUPPLY MODULE - 557.202.405

Be the first to review this product

Availability: In stock

$3,506.00
OR

Quick Overview

JOHNSON CONTROL TYCO mzx Minerva MX SEAPLUS WATER MIST SYSTEM FIRE ALARM SYSTEM t2000 PSB800 POWER SUPPLY MODULE - 557.202.405

JOHNSON CONTROL TYCO mzx Minerva MX SEAPLUS WATER MIST SYSTEM FIRE ALARM SYSTEM t2000 PSB800 POWER SUPPLY MODULE - 557.202.405

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The MX power PSU800 and PSB800 supply module usedfor the MX/ZX Range of fire controllers based on thedesigner housing (not MX2) is a state-of-the-art integratedswitch mode system power supply and battery charger,which can provide up to 5A external and auxiliary looppower during alarm conditions. It has a universal inputallowing operation from 100 to 255 Va.c., 50 or 60 Hz. Thepower supply is approved worldwide to EN54, UL864 andMarine standards.
The charging voltage is temperature compensated. ThePSM recharges the batteries within 24 h for the followingtimings:
> 90h stand by time and 15 min. alarm condition
> 72h stand by time and 30min. alarm condition
The power supply provides full condition and faultmonitoring to the system via the FIM (used by the PSB800)or addressable power supply monitor APM800 (used by thePSM800). The PSB800 incorporates the LBM800 boostermodule to provide the correct voltage levels to maximisethe performance of the MX DIGITAL protocol.
Faults signals (Loss of AC, Battery charger fault, Batteryfault) and control inputs (Battery test, Output reset) areprovided. Battery voltage and charger current readings arealso provided to the FIM or APM for automatic batterytesting.
Screw terminals provide 2 x 24V outputs (24 V stabilised,24V stabilised with reset control) and one 5V output.The power supply is fitted in a steel cage with mountingpoints to allow any of the following boards to be mounted:
> APM800 addressable power supply monitor
> FB800 fuse board with 15 x 24Vdc fused spurs
> IOB800 input/output expansion board
A PSB 800K Power Expansion Kit is required to power theXLM 800 pcb on 4 loop systems which require theextended loop power capability. It consists of a PSM800power supply module, an APM 800 addressable monitormodule, a battery connecting cable and an XLM800 toAPM800 connecting cable and may be fitted onto thechassis plate in the battery housing.

Technical Specification  
Dimensions: 50H x 114W x 190D mm
Weight: 0.9Kg
Input Voltage: 120-240 Vrms, 50/60Hz
  (Auto ranging)
Input Current: 0.8-1.6ARMS Rated Load
Max. charge current: Up to 3.8A
  (dependant on standby current)
Max. battery size  
(24hr charge): 38Ah
Max. total supply current: 5A@24Vdc
Maximum external current: 4A@24Vdc
Output Voltages: 24Vdc
  (22.8-26.4V)
Non-resettable: 24Vdc@4A
Resettable: 24Vdc@4A
  5Vdc@3A
Power Consumption: PSB-90mA
  (quiescent & alarm)
  PSM - 65mA
  (quiescent & alarm)

We supply 557.202.405 PSB800M Marine Panel Power Supply worldwide and other Tyco/Thorn products at competitive prices,such as fire and gas detection alarm control panel,smoke detector,temperature heat detector,flame detector,multi-sensor detector,explosion-proof detector,water-proof detector,CO detector,gas Detector,manual call point,audible and visual alarm device,detector base,isolator,safety barrier,I/O interface unit, module card, PCB circuit boards, fire door control unit, spray nozzle/sprinkler,test tools and other spare parts.
We also provide Tyco/Thorn project design,system integration,equipment selection,system commissioning,system maintenance and repair worldwide.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

[profiler]
Memory usage: real: 40370176, emalloc: 39542384
Code ProfilerTimeCntEmallocRealMem